Chimney stack repointing, cap repairs, lead flashing and full chimney rebuilds across Chesterfield, Derbyshire and South Yorkshire. Fixed properly, not just pointed over to hide the problem.
Crumbling mortar gets painted over. Broken chimney pots get filled with expanding foam. Flashing that’s lifted gets pushed back with a handful of cement. These are the quick fixes that look fine from street level and allow water to keep getting in behind them.
We don’t do pointing-over jobs. Chimney repairs done properly mean lime mortar that matches the original, correct lead flashing dressed to the stack rather than stuck down with lap seal, and an honest view of whether the pot, cap and cowl are doing their job. If a chimney needs rebuilding from the haunching, we’ll tell you that too.
From a simple repoint to a full stack rebuild, we carry out every type of chimney repair in-house, correctly, with access arranged before any work starts.
Full rake-out of failed mortar and repoint in appropriate lime or hydraulic mortar. No painting over the problem. Correct rake-out before any new mortar goes in.
Correct dressing of lead soakers, stepped flashings and back gutters around chimney stacks. Cut and dressed in-house, not pushed back with cement or lap seal.
Cracked or missing chimney pots replaced; chimney caps, cowls and birdguards fitted. Uncapped stacks let in water and nesting birds, so we install the correct terminal for the stack.
Stacks that have deteriorated beyond repair rebuilt from the haunching in matching brick. We’ll tell you honestly at the inspection whether repair or rebuild is the right answer.
A proper chimney repair covers more than repointing. Here’s everything we carry out on a full chimney repair or rebuild, all in-house, all checked by Gaz at close range.
Work is photographed at close range before scaffold or MEWP is removed. You see the finished repair in detail before we leave the site.
Four clear stages: honest inspection at the start, photographed sign-off at the end. Here’s what to expect when you work with GSM on a chimney project.
Close inspection of the chimney stack: lead flashing, mortar condition, pot and cap all assessed. Honest view given on repair vs rebuild before any access equipment is arranged.
Itemised quote distinguishing repointing from lead work from any structural repairs. No bundling everything into a single line, so you know exactly what you’re paying for.
Scaffold or MEWP erected and programme agreed. We won’t attempt chimney repairs without the correct access. Working from a ladder at chimney height isn’t safe and doesn’t allow a proper inspection.
Work carried out and photographed at close range. Access equipment is removed only once you’re satisfied with what you can see, not before.
Gaz and his team have just completed a conversion of our garage into a home office/den. From our initial conversation throughout the project Gaz was great to deal with. I asked him to take care of the whole project — up to and including decorating.…
We needed to rearrange the ground floor of our new house to better suit our growing family. GSM construction took down a load bearing wall to create an open plan living family kitchen, and built up a partition wall to separate off a separate snug.…
Gaz and team are all you need for all building works in your home! In my house they worked on areas such as a steel beam installation, tiling, plastering and joinery. Competitively priced, professional, tidy and friendly. Special mention to Matt, a true craftsman and…
I recently used GSM Construction for some work on my home and couldn't be happier with the results. They knocked down an internal wall, plastered the kitchen, and fitted new patio doors — all completed to a really high standard. From start to finish, their…
We’re based in Chesterfield and carry out chimney repairs across a 20-mile radius, close enough that Gaz can attend the site personally and inspect the work at close range before access equipment is removed.
Chimney stacks on every Victorian terrace in Chesterfield, and most haven’t had professional attention in decades. Common problems: failed lead flashing, crumbling mortar joints, and pots that need replacing or capping. We carry out more chimney repairs on Victorian terraces than any other property type.
Limestone and gritstone chimneys require matching mortar and correct lime pointing. OPC cement causes spalling damage to soft stone, so we use appropriate NHL mortar on all Peak District properties and understand the conservation area material requirements.
Concrete chimney caps cracking and flaunching failing on properties across Dronfield, Clay Cross and Alfreton. Pot replacement and flaunching repair are common jobs we carry out as standalone work or as part of a wider re-roofing programme.
Chimney repairs are frequently identified and completed at the same time as a full re-roof. Scaffold is already up, access is safe, and it’s the right time to inspect and repair the stack properly. We include this in the programme on most roofing projects.
Not sure if we cover your area? Call Gaz directly on 07727 263707 and we’ll give you a straight answer.
The most common questions homeowners ask us before starting a chimney repair project in Chesterfield and Derbyshire.
Chimney repairs are often carried out as part of a wider roofing or brickwork programme, all trades handled in-house.
Full re-roofs and repairs. Chimney work is commonly carried out at the same time as a re-roof while the scaffold is already in place.
View service →Repointing, brick repairs and new brickwork. Gaz is a time-served bricklayer and all chimney brickwork is carried out in-house.
View service →Full restoration programmes for Victorian and Edwardian properties, chimney repairs often form part of a wider exterior works package.
View service →Gaz will inspect the stack and give you an honest picture of what it needs, and what it doesn’t. We cover Chesterfield, Sheffield, Dronfield and the wider Derbyshire area.
A few details and we'll pick it up on WhatsApp.