Landscaping Services

Patios & Garden Design in Chesterfield & Derbyshire

Porcelain, sandstone and Indian stone patios laid on a proper mortar bed, not loose-laid on sand. Gaz applies the same groundwork standards to garden projects as to structural work, which means level surfaces that stay level and edges that hold their line.

Free Quotes £5m Public Liability 5.0 Star Rated Local to Chesterfield
Free Quote

Get a Free Quote

Tell us about your project and we’ll be in touch within 24 hours.

We never share your details. Replies within 24 hours.

Insured & Qualified Trading since 2018
Why it matters

A patio that rocks, lifts or cracks within two years was never bedded properly in the first place. That’s the whole difference.

Loose-laying slabs on sand looks fine on day one. Give it one winter freeze-thaw cycle and individual slabs start to move. Give it two and water is getting under the base, which accelerates the problem. With porcelain, a material that requires zero water absorption and therefore a full-coverage mortar bed, loose-laying on sand is simply the wrong method. It doesn’t matter how good the slab is if it’s not installed correctly.

Every patio we lay uses a proper compacted sub-base, a mortar bed, and full-coverage adhesive for porcelain. Falls are engineered from the start, sloping away from the house, with drainage accounted for, not left to hope. The edging restraint is concreted in. The whole system is designed to last for decades, not to look good in a photograph and fail by the third year.

Patio types

Which Patio Surface Is Right for You?

From sleek large-format porcelain to rustic natural sandstone, each material has different maintenance requirements, slip ratings and installation needs. We’ll guide you to the right choice for your space and budget.

Porcelain

Large-format tiles (600×600 to 900×600) in a wide range of finishes: stone effect, concrete effect, wood-effect planks. Near-zero maintenance, frost-proof and non-porous. Must be laid on full-coverage adhesive on a rigid base. The most popular choice for contemporary rear garden patios.

🟫

Sandstone

Natural Indian sandstone in buff, mint, grey or raj green. Warm, traditional appearance that suits period properties and cottage-style gardens. Requires sealing to reduce staining. More variation in colour and thickness than porcelain, cut and graded to account for this on site.

🪨

Limestone & Slate

Natural limestone gives a lighter, more formal appearance than sandstone. Calibrated slate provides a clean, contemporary alternative that performs well in Derbyshire’s wet winters. Both require appropriate sealant treatment before use and after cleaning.

🌿

Mixed Garden Areas

Patios combined with artificial grass, gravel borders, raised planters and planting areas. We can design and build the hard landscaping elements as an integrated project: stone patio, block retaining edges, gravel zones and artificial turf as a single installation.

Everything included

Excavated, compacted, mortar-bedded, pointed and sealed.

Every patio installation, whether porcelain, sandstone or natural stone, covers the same stages from excavation to clean-down. Here’s what’s included as standard.

  • Excavation and removal of existing surface
  • MOT Type 1 sub-base, compacted in layers
  • Falls designed away from the house
  • Concrete edging restraint to perimeter
  • Sharp sand and cement mortar bed
  • Full-coverage adhesive for porcelain
  • Slabs cut to size with wet saw on site
  • Grouting to appropriate joint width
  • Point-in mortar to natural stone joints
  • Drainage channels or soakaway where needed
  • Sealant application to natural stone (where specified)
  • Full clean-down and site clearance

For projects combining patio, artificial turf and planting borders, we manage the full hard landscaping programme. One team, one quote, one start and finish date.

Our process

How Your New Patio Comes Together

From site visit to grouting and seal: clear stages, a fixed price, and a finished surface you can use immediately after clean-down.

01

Site Visit

Gaz visits to measure the area, assess the existing ground levels and drainage, discuss surface material options and advise on what works best for your garden’s aspect, use pattern and budget. Sample material swatches can be arranged before you commit to a surface choice.

02

Written Quote

Fixed-price quotation with excavation, sub-base, mortar bed, slab material and pointing all itemised. If you want artificial turf, raised planters or gravel borders added to the scheme, these are quoted as line items so you can mix and match to budget.

03

Programme Agreed

Start date confirmed in writing. A standard rear garden patio typically takes 2–3 days from excavation to finished and pointed surface. Larger garden design schemes with multiple elements may take longer. You’ll receive a day-by-day programme with your quote.

04

Completion & Sign-Off

Once pointed and cleaned down, Gaz walks you around the finished job. Any sealant to be applied is discussed at this stage. We ask you to sign off the work before we leave. Snags raised on the day are dealt with on the day, not a week later by email.

Real Projects. Real Customers.

Our Patios & Garden Design Work

Where we work

Patios & Garden Design Across Chesterfield & Derbyshire

We’re based in Chesterfield and carry out patio and hard landscaping projects across a 20-mile radius. Gaz attends every site visit personally, and garden projects get the same attention as structural ones.

Chesterfield & Brampton

Semi-detached and detached properties in Chesterfield and Brampton typically have modest rear garden spaces where a well-designed patio transforms how the space is used. Porcelain paving with artificial grass strips is currently the most requested combination in this area: low maintenance, hard-wearing, and suitable for families with children. We’re installing multiple projects in Chesterfield S40–S44 every season.

Dronfield, Eckington & Surrounding Villages

Gardens in Dronfield and the villages to the east of Chesterfield often have more character: irregular shapes, sloping terrain and mature planting to work around. Natural sandstone and limestone complement the stone construction common in these areas far better than concrete-based alternatives. We survey the levels carefully so that falls work across the full patio area, not just in one direction.

Peak District & North Derbyshire

Properties within or adjacent to the Peak District National Park sit in landscapes where materials matter, both visually and to planning authorities. Natural stone is almost always the right choice, and we source locally quarried stone where possible. For gardens in conservation areas, we can advise on what materials are likely to be viewed favourably if planning input is needed.

Sheffield & South Yorkshire

We take on patio and garden design work in Sheffield where the scale or specification justifies it, particularly in the S17 and S18 corridors around Dore, Totley and Ridgeway where properties often have larger gardens and more complex landscaping requirements. Call us to discuss whether your project is within our working area.

Not sure if we cover your area? Call Gaz directly on 07727 263707 and we’ll give you a straight answer.

FAQ

Patio Questions Answered

The most common questions homeowners ask us before starting a patio or garden design project in Chesterfield and Derbyshire.

Both work well. The right choice depends on your garden style, maintenance appetite and budget. Porcelain is non-porous, frost-proof and requires very little maintenance, with no sealing needed and staining wipes off. Sandstone is warmer in appearance and suits traditional and period properties better. It requires sealing and can stain if not maintained. If low maintenance is the priority, porcelain is usually the answer for a Derbyshire garden.
Yes, if the existing concrete is sound, level and correctly drained. We assess the existing base at the site visit. If it’s cracked, uneven or too close to the house DPC, we’ll break it out and start from scratch. Laying porcelain on a failing base transfers the failure to the new surface. If the base is adequate, overlaying adds 20–30mm to finished floor level; we’ll check this doesn’t create a problem with door thresholds or drainage falls.
Two approaches: correct installation from the start, and the right jointing material. For new patios, we use a full mortar bed rather than loose sand, which eliminates the organic material that feeds weed growth. For joints, brush-in paving mortar (polymeric grout) sets hard and doesn’t harbour seeds the way kiln-dried sand can. For existing patios that are weeding badly, the joints can be raked out and re-filled with polymeric mortar without lifting the slabs.
The finished patio surface should sit at least 150mm below the damp-proof course, typically two to three brick courses below the DPC. This is to prevent water on the patio surface bridging the DPC and causing damp internally. We check and note the DPC position at every site visit and design the finished level accordingly. Patios bridging the DPC are one of the most common causes of ground-floor damp in older properties.
Yes, artificial turf is included in our garden design and landscaping scope. We install it as part of a combined patio and garden project, with a crushed aggregate base and properly anchored edges. For projects that combine porcelain paving, artificial grass strips and gravel borders, we manage the whole hard landscaping installation as a single programme with one quote and one team.
Ready to talk?

Gaz Will Come Out and Give You a Straight Quote.

Whether it’s a new porcelain patio, a sandstone seating area or a full rear garden redesign, Gaz will come out, assess your space and give you an honest price. We cover Chesterfield, Sheffield, Dronfield and the wider Derbyshire area.

Message us on WhatsApp